Undergo Basic Principles in Concrete Floor Coatings - A wise statement says that preparation
is everything. It determines to whole matters starting from the
processes up to the outcome. True, such thing also goes on to the
installation of concrete flooring as well as coating it. Concrete floor coatings are something usually assumed to be elementary since it is not hard to do so.
You can either ask the coating service
or flooring installation service to do that for you or you can try to
cope with it on your own. Nonetheless, because of its simplicity, some
basic protocols are often neglected and it is usually done by the
professional flooring contractors. Although at first you can find the
coating can be done properly, in a matter of a while, you can find that
the result will turn bad.
Concrete Floor Coatings: Step by Step
Based on the things above, to understand basic preparation principles in coping with concrete floor coatings
is absolutely necessary. The better you can have the preparation will
lead you to the better results. If you are wondering about what should
be done, below are the principles that you need to follow if you are
seeking for the most optimal outcome.
To start concrete flooring coatings,
firstly, you need to determine or know the floor type that you are going
to handle. For your information, there are various concrete floor types
out there and each of them demands different treatments. Typically,
those types can be divided into three major categories: soft, hard, and
medium. It is really fundamental to know it so you can determine later
acts you need to undergo.
Another preparation part you must
acknowledge and needs to be determined beforehand is the grinding
method. Commonly, you know two methods here. The first is shot blasting.
A lot of contractors prefer to do this method because it is cheaper
than the other method. Of course, the aim is to cut down their operating
cost to maximize the profits. But, you need to know that this method is
actually the aggressive and hard one.
Thus, it is only suitable to do it when
you want to take care of the flooring surface. Forget doing this method
if you are going to handle a thin film. If you are taking care of the
more fragile and need-to-be-handled-gently matters, the second method
should be applied and it is called diamond grinding.
That is why you should do it if you are handling with epoxy or urethane.
Unlike the previous grinding technique, it will not damage the
concrete.
Make sure you grind all the edges. This
matter is normally abandoned by the contractors because it will take
more time and skills. Yes, indeed, most contractors think that detailed
matters are really frustrating. Thus, it is totally better for you to
take care of concrete floor coatings on your own so you can determine
the quality by yourself.
Whenever you have thought the grinding is enough, it is the time for
cleaning. To make sure you can have complete bonding, sweeping and
vacuuming the floor is really necessary. Make sure you do it all the way
to the edges so there will be no debris or residues remain.
Finally, you can start with concrete floor coatings
and you should do it with the first layer as the “foundation” which is
then followed by the second layer. Sanding should be undergone after
applying the second layer so the bonding can be strong enough and do not
forget to clean the residues after applying the sanding. As final
touch, urethane top coat is bonded to the flooring.
